Construction of MIM Diodes Suitable for Use in FIR Generation By Mixing Two Carbon Dioxide Laser Beams


Article info

39 - 57

Keywords

Abstract

Metal Insulator Metal (MIM) diodes have been constructed with a tungsten whisker making contact with different post materials such as nickle, brass, carbon, stainless steel, aluminum and tungsten. The 1-V characteristics of these diodes have been studied. It was found that 2 mm section cut from a shaving blade held against a polished carbon post showed similar I-V characteristics to the previous diodes. Resistances of these diodes were found to vary between 0.1-1k The use of MIM diodes for CO2 laser mixing is briefly discussed.

These articles may interest you also

بناء الصمامات الثنائية من نوع معدن-عازل-معدن للحصول على أشعة تحت حمراء طويلة الموجة و ذلك من خلال مزج شعاعين من ليزر ثاني أكسيد الكروبون


معلومات المقال

39 - 57

الكلمات الإفتتاحية

الملخص

Metal Insulator Metal (MIM) diodes have been constructed with a tungsten whisker making contact with different post materials such as nickle, brass, carbon, stainless steel, aluminum and tungsten. The 1-V characteristics of these diodes have been studied. It was found that 2 mm section cut from a shaving blade held against a polished carbon post showed similar I-V characteristics to the previous diodes. Resistances of these diodes were found to vary between 0.1-1k The use of MIM diodes for CO2 laser mixing is briefly discussed.

These articles may interest you also

An-Najah National University
Nablus, Palestine
P.O. Box
7, 707
Fax
(970)(9)2345982
Tel.
(970)(9)2345560
(970)(9)2345113/5/6/7-Ext. 2378
E-mail
[email protected]
Dean
Prof. Waleed Sweileh